Detailed Product Description

Temperature controller main technical specification

1   Basic error ≤±0.5%F.S±1,±0.3%F.S±1   

2  Cold end compensating deviation  ≤±2.0

3   Sampling period   0.5Second

4   Control cycle :relay output 2120S , other is 2S.

5   Alarm output the drop in level  0.5 or 5

6   Relay output contact capacity: AC250V/7A (resistance load) or AC250V/0.3A (perceptual load)

7  Driving controllable pulse output: ≥3V scope, ≥50us widths over zero or trigger contact pulse

8   Driving solid relay signal output: driving electric current≥15mA, voltage≥9V.

9   Continuous PID  : 010mA (load 500±200Ω), 420mA (load 250±100Ω),      

or 05V (load≥100kΩ) , 15V (load≥100kΩ)

10 Power: AC90V242V, 50/60Hz

11  Work environment temperature 050.0, relative humidity≤85%RH, without corrode and strong electric radiation.

Product code:

          XMT__   9  __   8   __ 

                (1)  (2) (3)  (4)  (5)

(1) Meter faceplate dimension

Blank: 160mm × 80mm x 120mm        Installation hole: 152mm x 76mm

A: 96mm x 96mm x 110mm                 Installation hole: 92mm x 92mm

D: 72mm x 72mm x 110mm                 Installation hole: 68mm x 68mm

E: 48mm x 96mm x 110mm                 Installation hole: 44mm x 92mm

F: 96mm x 48mm x 110mm                 Installation hole: 92mm x 44mm

S: 80mm x 160mm x 120mm                Installation hole: 76mm x 156mm

G: 48mm x 48mm x 110mm                 Installation hole: 44mm x 44mm

(2) Design serial number

(3) Alarm

 "0" : no set alarm;        "1": one alarm;        "5": voice alarm;            " 3": two group alarm (upper limit, lower limit, positive deviation alarm and negative deviation alarm discretionary setting)

(4)Input signal

 " 8": Free exchange of the input signal

(5)Control method

"   "  :  Relay contact 

"A ":  Single-phase over-zero trigger adjustment

" A3 ": Three-phase over-zero trigger adjustment

" B ":  Single-phase shift-phase trigger adjustment

" B3 ": Three-phase shift-phase trigger adjustment

" C1 ": 0-10mA,4-20mA constant electric current output

" C2 ":0-5V or 1-5V voltage output

" G ":  SSR adjustment output